We can choose manual sliding tables, plastic handles, folding handles, and aluminum alloy handles according to the customer’s industry. Angle rulers, position displays, tachometers, and gravity displays can be modified using a handwheel. The manual sliding table is driven by a handwheel and single, multiple, or left and right opening trapezoidal threads. The accuracy of the workpiece can be checked by combining the size and indicator plate of the sliding table and the base. Let’s take a look at the characteristics of manual sliding tables.

The characteristics of manual sliding table:

1. Structure and characteristics: The sliding table and base are made of A6063S-T5 aluminum alloy, which has high rigidity, high precision, low price, small volume, light weight, aluminum alloy structure, and modular design. The sliding table and base are assembled on a linear guide rail through anode, and the displacement relative to the load is very small, which can maintain high stability even in applications with installation quality and external load fluctuations.

2. Maintenance free: The slider and linear guide are standard products. Under normal operating conditions, it can operate for 5 years without maintenance or 10000 kilometers. If lubricating grease can be added according to the prescribed method, the service life will be longer. All products use AV2 lubricating grease for the casing, and the slider is filled with PS2 graded quenching oil produced by the casing company.

3. Diversified selection: The manual work slider can be selected according to the customer’s industry: plastic handle, folding handle, aluminum alloy handle slider, handle angle ruler, position indicator, speed counter, gravity indicator slider, and base workpiece accuracy can be achieved through the combination of size and indicator board.

4. High positioning accuracy: The robotic arm adopts a rolling structure, with low friction and high positioning accuracy, and can be used for a long time. Manually detect the standard position of the stage, position it in a certain direction, and measure the difference between the actual distance moved from the standard position and the distance that should be moved at each position. Repeat 7 times and calculate their average value. The test almost covers the entire movement distance. When the models are different, the tests shall be conducted according to the prescribed test intervals for each model. The average value shall be taken at each position, and the larger value shall be taken as the measured value.

The manual slide is used for removing and installing clips. Mobile positioning, automated workstations, semiconductor equipment, TFT-LCD LCD screen equipment, solar equipment, LED wire control equipment, mechanical internal XYZ axis workbench, chewing gum, locking screws, visual inspection and other high-speed and high-precision places, measurement equipment, etc.

The above is an introduction to the characteristics of manual sliding tables. Do you all know after reading it? I hope it will be helpful to everyone.