What should be noted during the trial operation of the electric sliding table? You need to know three precautions for the trial operation of the electric sliding table. After installing, adjusting, inspecting, maintaining, repairing, etc. of the robot, please carry out the trial operation in the following order.

（1） Places without pre prepared safety barriers after installation

Extend the ropes on both sides of the movable range of the cable and lock to replace the safety barrier. Please strictly follow the following instructions:

1. Support is not easy to move.

2. It can be easily identified from the surrounding area.

3. It is marked in a very easy to see area that entry is prohibited for operation, and workers are not allowed to enter the movable area.

（2） Confirmation before inserting the controller power supply

1. Is the electric slide intelligent robot installed properly.

2. Is electrical equipment properly installed.

3. Is the continuity with grounding devices appropriate.

4. Is the continuity with nearby linear modules moderate.

5. There are measures for safety protection and prevention (such as safety barriers) in place.

6. Set whether the natural environment is within a specific natural environment.

（3） Confirmation after inserting the controller power supply

After inserting the controller power, confirm the following:

1. Can the start, stop, selection method and other function keys be turned on normally.

2. Can the software limit be limited based on the rotation of each axis.

3. Can the final actual effect be carried out according to the plan.

4. Is everything normal with the final actual effect and the exchange of data signals from nearby devices.

5. Can emergency termination operate.

6. Is the function of teaching aids and rehearsals normal.

7. Can the functions of safety protection and connecting equipment be based on.

8. Can you maintain a moderate posture during fully automatic operation.